EBSILON®Professional Online Documentation
In This Topic
    Component 108: Elementary Analyser
    In This Topic

    Component 108: Elementary Analyser


    Specifications

    Line connections

    1

    Inlet

    2

    Outlet

     

    General       User Input Values       Displays       Example

     

    General

    This component allows for a breakdown of an inlet stream into individual elements (C, H, O, N, S, Cl, ash, lime). This makes it possible to switch a combustion e.g. from coal to gas
    without having to change the inlet fluid of the combustion equipment unit.

    The component always retains the calorific value of the inlet stream, even though it does no longer match the calorific value calculated from the elemental analysis.

    For dealing with the differences in enthalpy due to the different material data, the user can specify whether the enthalpy or the temperature is to be retained.

       

    For this component it is possible to specify the coefficients for the out flowing fluid either internally as specification values in the component or externally with a start value (Component 33) on the outlet line. This is controlled via a flag FCOEF. In the case of an external specification it is also possible to specify such coefficients for which internally there is no
    option for specification like e.g. the coefficients for the specific heat capacity in the user-defined fluid. As meanwhile magnesium and calcium are available as elements in Ebsilon as well,
    in the case of a binary fluid at the inlet a complete elementary analysis can be carried out for most substances. Only for LiBr as well as for the elements Na and K this is not possible;
    these are mapped onto “ash“.

     


     

    User Input Values

    FSPECH

    Handling of energy balance

    Like in Parent Profile (Sub profile option only)

    Expression

    =0: Conservation of energy

    =1: Conservation of temperature

    FCOEF

    Specification of fluid coefficients

    Like in Parent Profile (Sub profile option only)

    Expression

    =0: By specification values within this component
    =1: By component 33 on outlet stream

    FREALGC

    Real gas correction                  

    Like in Parent Profile (Sub profile option only)

    Expression

    =-1: According to model options

    = 0: None real gas correction

    = 1: Peng-Robinson

    = 2: Redlich-Kwong-Soave

    = 3: Lee-Kessler-Ploecker

    FCOAL

    Coal type

    Like in Parent Profile (Sub profile option only)

    Expression

     =0: Old mode

    =1: Hard coal

    =2: Lignite

    old Mode:
    (see definition of material properties)
    If the fluid is coal, there are additional fields for the ”Coal Type”, the ”Volatiles Fractions” and for the ”Total Water Fraction” and the ”Total Ash Fraction”.
    The use of ”old mode” is compatible with previous EBSILON®Professional-releases, where the calculation of coal properties was not type-specific.

    VOLA

    Volatile mass fraction (only for coal)

    RHOELEM

    Density for fraction defined by elementary analysis (only for oil)

    ZFAC

    Z factor (only for oil)

    CPCORR

    Correction factor for cp ash
     



    Component Displays

    Display Option 1

    Example

    Click here >> Component 108 Demo << to load an example.

     

    See Also