Additional Firing

Documentation of the input as well as the output data of the additional firing. The values are taken from the channel burner (e.g. component 41) at the inlet or the outlet line of the flue gas respectively as well as of the fuel inlet.

Component:

Channel burner (41)

Example:

Alstom Plant: KA-24 Unit: 1 R-Date: 21.12.2004 16:51:14

Title for the additional firing

	M [kg/s]	P [bar]	T [°C]	H [kJ/kg]	Q [kW]	NCV [kJ/kg]
Duct_burner	624.000 1.000 625.000	1.052 1.052 1.050	613.00 15.00 672.47	662.1 32.7 733.7	413132.6 32.7 458548.5	50015

Material fractions fuel: (volume)

CH4	1.0000000

Material fractions flue gas after firing: (volume)

N2	0.7574560	H2O(gas)	0.0481922
O2	0.1527373	CO2	0.0325436
Ar	0.0090709

The report is generated in three tables:

In the first table, the general pipe data are printed.
- Line 1 contains the input data of the flue gas line or of the primary inlet respectively.
- Line 2 contains the input data of the fuel line.
- Line 3 contains the output data of the fuel line.
In the second table the material composition of the fuel is printed.
In the third table the material composition of the flue gas after the firing is printed.

Generate Sub-report

Select the channel burner (additional firing) in the model.
Call the dialog box "Modify Sub-Report".
Select the sub-report "Additional firing" and import it in the list of the sub-reports.
Enter an extra title, if needed.
Select the sub-report for the channel burner and then click on the button "Modify" or else double-click the sub-report for the channel burner.
The dialog box "Edit Sub-Report" now opens.
A click on the button "Insert (Sel.)" inserts the components selected earlier in the cycle in the list of the components of the sub-report.
Close the dialog box for the list of the components through the button "Close".
Close the dialog box for modifying the sub-report through the button "Close".

The components selected earlier are inserted in the sub-report.

Impressum Disclaimer