EBSILON®Professional Online Documentation
Data Transfer and Results Display / Create Report / The Sub-Reports / Steam Turbine, Design Data
In This Topic
    Steam Turbine, Design Data
    In This Topic

    Steam Turbine, Design Data


    Documentation of the design data of the steam turbine - calculation.

     Components:

    • Turbine (component 6)
    • Steam turbine (ABB type) (component 56)
    • Nozzle section control (component 58)

     Example:

    Alstom Plant: KA-24  Unit: 1 R-Date: 21.12.2004 16:51:14

     

    Title for the design data of the steam turbine

     

    Pi
    [kW]

    PmechV
    [kW]

    eta
    [%]

    DHv
    [kJ/kg]

    M(n)
    [kg/s]

    p(n)
    [bar]

    T(n)
    [°C]

    K2

    DT_HD

    19805.4

    305.0

    0.89

    0.00

    58.743

    156.0
    42.22

    561.70

    11.303

    DT_IP

    25864.9

    0.0

    0.90

    0.00

    57.696

    35.63
    6.631

    561.91

    47.622

    DT_LP1

    31270.5

    0.0

    0.93

    0.00

    70.377

    6.565
    0.732

    328.08

    264.469

    DT_LP2

    22762.9

    457.0

    0.94

    24.89

    70.377

    0.732
    0.063

    101.99

    1867.487

    Total:

    99703.8

    762.0

     

     

     

     

     

     

     

     Comments on the report:

    Pi

    Inner turbine power.

    (Pmech(Output) - Pmech(Input))
    + mechanical losses
    + piston losses

    PmechV

    Mechanical losses

    eta

    Isentropic efficiency

    DHv

    Outlet losses (dynamic losses) in the operating state

    M(n)

    nominal mass flow

    p(n)

    nominal pressure

    T(n)

    nominal inlet temperature

    K2

    Cone law constants (swallow number)

    Summe: Pi

    Total of the inner turbine powers of the individual stages

    Summe: PmechV

    Total mechanical losses of the individual stages

    Calculation of the cone law constants:

     

    For each component, as far as available, the input values are documented in the first line and the output values in the second line.


    Generate Sub-report 

    • Select all turbine components in the model.
      The components must be selected in the sequence of the highest pressure to the lowest pressure at the turbine inlet.
    • Call the dialog box "Modify Sub-Report".
    • Select the sub-report "Steam turbine, design data" and import it in the list of the sub-reports.
    • Enter an extra title, if needed.
    • Select the sub-report for the design data of the steam turbine and then click on the button "Modify" or double-click the sub-report for the design data of the steam turbine.
      The dialog box "Edit Sub-Report" now opens.
    • A click on the button "Insert (Sel.)" inserts the components selected earlier in the cycle in the list of the components of the sub-report.
    • Close the dialog box for the list of the components through the button "Close".
    • Close the dialog box for modifying the sub-report through the button "Close".

     

    The components selected earlier are inserted in the sub-report in the order, in which they were selected.