Feed Water Tank

Documentation of the input and output data of the feed water tank.

First, all the input values and then all the output values are documented for the feed water tank.

Components:

Example:

Alstom Plant: KA-24 Unit: 1 R-Date: 21.12.2004 16:51:14

Title for the feed water tank

	M [kg/s]	P [bar]	T [°C]	H [kJ/kg]	Q [kW]
Feed_water_tank Kondensat-Eintritt Heizdampf-Eintritt Sekundärer Kondensat-Eintritt Stützdampf Heizwasser Speisewasser-Austritt	. 217.238 9.717 7.346 0.000 0.000 -234.301	. 0.200 1.252 0.200 42.41 0.200 0.200	. 33.28 134.90 60.09 400.99 60.00 60.09	. 139.4 2744.0 268.3 3213.9 251.1 251.5	. 30282.2 26662.5 1970.9 0.0 0.0 58915.5

Comments on the report:

For the feed water tank, first the data of the configured inlet pipes and then the data of the configured outlet pipes is documented.
Outlets of the feed water tank are marked by a negative mass flow rate.
Connections of the feed water tank, to which no pipes are connected, are not documented.

Generate sub-report

Select the feed water tank in the model.
Call the dialog box "Modify Sub-Report".
Select the sub-report "Feed water tank" and import it in the list of the sub-reports.
Enter an extra title, if needed.
Select the sub-report for the feed water tank and then click on the button "Modify" or else double-click the sub-report for the feed water tank.
The dialog box "Edit Sub-Report" now opens.
A click on the button "Insert (Sel.)" inserts the components selected earlier in the cycle in the list of the components of the sub-report.
Close the dialog box for the list of the components through the button "Close".
Close the dialog box for modifying the sub-report through the button "Close".