EBSILON®Professional Online Documentation
Data Transfer and Results Display / SRx - Interface / SRx Menu Access
In This Topic
    SRx Menu Access
    In This Topic

    Access to SRx via Menu Commands


    In the framework of an SR::EPOS system it is possible to get access from EBSILON®Professional in the office to the SRx data server. For this purpose, it is required to configure the data points that shall transferred . During this configuration, you have to specify which data points can be read only and which may be modified.

    Reading and writing of data is performed by the menu command "Data" à "SRx".

    For the access, you have to insert the computer name and the port number of the SRx data server that shall be used.

    The field "Selected SRx Archive" in the range "Data Selection" can be left empty. In this case, each data point is read from or written to that archive that is defined in the configuration list for the corresponding point.

    If you insert an entry in "Selected SRx Archive", this entry is used instead of the settings for each points. E.g., this may be used to load directly hourly or daily averages to the EBSILON®Professional model.

    After inserting the required time, the dataset will be loaded by clicking "Load dataset from SRx". This procedure reads the data that are configured for reading from SRx and inserts them directly to the EBSILON®Professional model.

    "Write dataset to SRx" sends data for all points that are configured for writing from Ebsilon to the SRx data server with the time stamp that is specified in "Selected Time".